1 配置需求及說明
1.1 適用的產品系列
本案例適用于軟件平臺為Comware V7系列防火墻：F100-X-G2、F1000-X-G2、F100-X-WiNet、F1000-AK、F10X0等。
注：本案例是在F1000-C-G2的Version 7.1.064, Release 9323P19版本上進行配置和驗證的。
1.2 配置需求及實現的效果
V7防火墻設備作為出口設備，外網PC通過inode軟件撥SSLVPN，認證成功后可以訪問內網192.168.10.0網段的資源。IP地址及接口規劃如下表所示：
2 組網圖
3 配置步驟
3.1 防火墻上網配置
防火墻上網配置已配置完成，本文只針對SSLVPN配置進行介紹。
3.2 配置SSL VPN網關
#SSLVPN網關IP地址填寫防火墻1口地址222.1.1.1.00，端口號修改為4433，缺省端口為443，443端口和https端口沖突，然后使能網關配置。
<H3C>sys
[H3C]sslvpn gateway SSLVPNGW
[H3C-sslvpn-gateway-SSLVPNGW]ip address 222.1.1.100 port 4433
[H3C-sslvpn-gateway-SSLVPNGW]service enable
[H3C-sslvpn-gateway-SSLVPNGW]quit
#創建SSL VPN AC接口1,配置接口IP為10.10.10.1/24
[H3C]interface SSLVPN-AC 1
[H3C-SSLVPN-AC1] ip address 10.10.10.1 255.255.255.0
[H3C-SSLVPN-AC1]quit
#創建地址池名稱為“SSLPOOL”，指定IP地址范圍為10.10.10.2——10.10.10.254
[H3C]sslvpn ip address-pool SSLPOOL 10.10.10.2 10.10.10.254
#創建ACL 3999，允許SSL VPN用戶訪問的內網資源192.168.10.0/24網段
[H3C]acl advanced 3999
[H3C-acl-ipv4-adv-3999]rule permit ip destination 192.168.10.0 0.0.0.255
[H3C-acl-ipv4-adv-3999]quit
3.3 配置SSL VPN實例
# 配置SSL VPN訪問實例“SSLVPNSL”引用SSL VPN網關“SSLVPNGW”
[H3C] sslvpn context SSLVPN
[H3C-sslvpn-context-SSLVPN]gateway SSLVPNGW
#引用SSL VPN接口1
[H3C-sslvpn-context-SSLVPN] ip-tunnel interface SSLVPN-AC1
#引用SSL VPN地址池，掩碼和DNS
[H3C-sslvpn-context-SSLVPN]ip-tunnel address-pool SSLPOOL mask 255.255.255.0
[H3C-sslvpn-context-SSLVPN]ip-tunnel dns-server primary 114.114.114.114
#創建路由列表“NEIWANG”，添加路由表項192.168.10.0/24
[H3C-sslvpn-context-SSLVPN] ip-route-list NEIWANG
[H3C-sslvpn-context-SSLVPN-route-list-NEIWANG] include 192.168.10.0 255.255.255.0
# 創建SSL VPN策略組“SSLVPNZIYUAN”，引用路由列表“NEIWANG”，配置ACL限制，只有通過ACL檢查的報文才可以訪問IP資源
[H3C-sslvpn-context-SSLVPN] policy-group SSLVPNZIYUAN
[H3C-sslvpn-context-SSLVPN-policy-group-SSLVPNZIYUAN]filter ip-tunnel acl 3999
[H3C-sslvpn-context-SSLVPN-policy-group-SSLVPNZIYUAN]ip-tunnel access-route ip-route-list NEIWANG
[H3C-sslvpn-context-SSLVPN-policy-group-SSLVPNZIYUAN]quit
[H3C-sslvpn-context-SSLVPN] service enable
[H3C-sslvpn-context-SSLVPN]quit
3.4 新建SSL VPN用戶，關聯SSLVPN資源組
#創建SSLVPN本地用戶,配置用戶名密碼user1,服務類型sslvpn，引用之前創建的SSLVPN資源組
[H3C]local-user user1 class network
[H3C-luser-network-user1]password simple user1
[H3C-luser-network-user1]service-type sslvpn
[H3C-luser-network-user1]authorization-attribute sslvpn-policy-group SSLVPNZIYUAN
[H3C-luser-network-user1]quit
3.5 將SSL VPN端口加入安全域，放通對應安全策略
#新建安全域，名稱為“SSLVPN”，將SSL VPN端口1加入到安全域“SSLVPN”
[H3C]security-zone name SSLVPN
[H3C-security-zone-SSLVPN]import interface SSLVPN-AC1
[H3C-security-zone-SSLVPN]quit
#創建服務對象組，組名稱為4433，匹配SSLVPN端
[H3C]object-group service 4433
[H3C-obj-grp-service-4433]service tcp destination eq 4433
[H3C-obj-grp-service-4433]quit
#配置配置安全策略將Untrust到Local域目的端口為TCP4433端口放通
[H3C]security-policy ip
[H3C-security-policy-ip]rule 5 name Untrst-Local
[H3C-security-policy-ip-5-Untrst-Local]action pass
[H3C-security-policy-ip-5-Untrst-Local]source-zone Untrust
[H3C-security-policy-ip-5-Untrst-Local]destination-zone Local
[H3C-security-policy-ip-5-Untrst-Local]service 4433
[H3C-security-policy-ip-5-Untrst-Local]quit
#配置配置安全策略,放通源安全域為SSLVPN，目前安全域為“Trust”的數據流量
[H3C-security-policy-ip]rule 10 name SSLVPN-Trust
[H3C-security-policy-ip-10-SSLVPN-Trust] action pass
[H3C-security-policy-ip-10-SSLVPN-Trust] source-zone SSLVPN
[H3C-security-policy-ip-10-SSLVPN-Trust] destination-zone Trust
[H3C-security-policy-ip-10-SSLVPN-Trust]quit
3.6 保存配置
save force
3.7 配置驗證，查看撥號成功的用戶
<H3C>dis sslvpn session verbose
User : user1
Context : SSLVPN
Policy group :SSLVPNZIYUAN
Idle timeout : 30 min
Created at : 18:16:02 UTC Sun 08/26/2018
Lastest : 18:32:32 UTC Sun 08/26/2018
User IPv4 address : 222.1.1.99
Alloced IP : 10.10.10.2
Session ID : 3
Web browser/OS : windows
4 注意事項
1、本案例適應的是默認證書，不需要手工導入CA證書和本地正常
2、不需要配置SSL服務器端策略，SSLVPN網關不需要引用SSL服務器端策略
